Tactacam Remote For 5.0 & Fish-i Units

(0) No Reviews yet


In Stock



Tactacam Remote

After the initial pairing, the remote controls up to 5 Tactacam 5.0 or Fish-i cameras with one button. Functions include Power ON Auto Record / PAUSE/ OFF and when not recording conserves batteries with the Auto Power off feature. All cameras and Remote will power down after 3 min when not recording. But don’t worry they all will power back on just as fast with a push of the Tactacam remote button. Tactacam Remote Technology gives you the feedback you need, all on an LCD screen: Number of connected cameras, Record length, Remote Battery life and the Green LED indicates Recording, Pause/On and Off. Tactacam Remote has been optimized at 100 feet giving you the distance and control over your cameras. Note: Tactacam remote is only compatible with Tactacam 5.0 and Fish-i cameras.

To get started link your Tactacam 5.0 or Fish-i and Remote. 
  1. Power on camera and remote, then pause both 
  2. On the camera, using two fingers place one on the mode button and one on Power/record button. 
  3. Perform the following within 2 seconds (Push and hold the mode button followed by the power record button). You will see the remote connection number increase by 1 number. If this is the first camera synced a 1 will be displayed on the remote. 
  • After you have linked your Tactacam 5.0 or Fish-i with the Tactacam Remote your remote will operate your camera from the OFF position. When you push the remote button the linked Tactacam 5.0 or Fish-i camera(s) will power on and start recording. 
  • The green blinking LED light on the Remote and cameras indicates recording. The recording length is also displayed on the Remote display. 
  • To stop the recording simply push the remotes power record button. All connected 5.0 and Fish-i cameras will stop and save their recording. 
  • At this point, you can perform 3 operations. 1 Push to start all recording, 2 Push and hold to power all cameras and remote off or 3 nothing… all units will power off after 3 minutes to optimize battery life. But don’t worry they all will power back on just as fast with a push of the Tactacam remote button.

Ratings & Reviews

No reviews available

Be the first to Write a Review