Do your boots have holes in them from working out in the field or the barn? Don't toss them out and replace them, fix them! Vettec's new SG-20 Adhesive is perfect for the job. It also repairs Neoprene and Breathable waders. For Neoprene waders, they repair can be done as long as the waders are clean and dry.
If a repair is being made on the breathable wader material you would not try to fix the leak on the outside of the waders as it will not totally bond. This is because the breathable wader material is covered with a water resistant coating that SG-20 doesn't adhere to. Instead, it is suggested to turn the waders inside out as much as possible to access the area. You should be able to hit that area with the mix tip and then cover it with the pink plastic included in the kit. If you can't reach the area with your mixing tip, then put enough material on the plastic and quickly place the plastic over the leak. Hold it there for 30 seconds, wait about 15 minutes, and then you can peel the plastic off.
SG-20 is made of a propriety blend of two-part poly-urethane adhesive material that adheres to dry neoprene, poly-urethane, and canvas making it ideal for repairing many different styles of Muck Boots, frog toggs, Xtra Tuff boots and foul weather gear. Damaged gear can be fixed quickly simply by cleaning and drying the damaged material and applying SG-20. The SG-20 Adhesive sets in one minute and dries in one hour, creating a smooth, water-tight seal and keeping air, dirt and debris out. After it’s dry, SG-20 remains flexible, moving naturally with the material. Repairs with SG-20 have been shown to be incredibly durable, lasting five or more years in the field.