RCBS Stuck Case Remover
RCBS Stuck Case Remover extracts stuck cases from standard sized dies without damaging the die using a simple two step removal process. This Stuck Case Remover includes tap, drill bit, allen screw, allen wrench and remover. It will work with any brand of die.
Instructions for the RCBS Stuck Case Remover
Unscrew the expander-decapping rod until the decapping pin is free of the primer flash hole in the stuck case. Secure the reloading die in a vice and drill the case head with the included drill bit. Drill straight through the primer pocket and the primer flash hole. Next tap the case head the included 1/4"-20 tap. Place the stuck case remover body onto the case head and turn the cap screw with the allen-type wrench until the case is pulled from the die. Discard the case and reassemble the die.