4GB Of Internal Storage
Store and play up to 500 sounds with the huge 4GB of internal memory. The Snow Crow Pro 2 will come standard with 100 high quality sounds from FoxPro's sound library.
24-bit audio for extreme audio performance. This digital calling system can play .mp3, uncompressed.wav, .fxp (FoxPro's proprietary file type), and .24b (FoxPro's 24-bit file type).
Two External Speaker Jacks
Connect up to two additional TOA speakers to the Snow Crow Pro 2 for a total of four speakers playing at the same time. Control those external speaker from the TX-500 remote control.
USB 2.0 Port
Easily and quickly reprogram right from your computer.
16 Channels of Remote Operation
Operate up to 16 different units from a single remote
Use the Snow Crow Pro 2 with the remote or choose to operate it manually from the controls located on the front.
Stereo or Mono Operation
Stereo and mono operation modes can be selected from the TX-500 remote control.
The charge jack can be used with the 12 volt battery charger.
Improved Remote Performance
By using FHSS technology, remote range and reliability will increase greatly
Extra Large LCD Panel
The extra-large LCD panel enables easy to read text and menu navigation. The LCD panel features a red back light with adjustable brightness control - off, low, medium and high. Also invert the graphics display for night time use.
Numeric Keypad Sound Entry
Directly enter the number of the sound you want to play on the numeric keypad for direct access. For those that prefer scrolling, the rotary selector knob slows you to scroll through sounds without the need for memorizing your sound list.
Adjustable Sound Scrolling
Use the rotary knob to advance through sounds by the page or by single sounds one at a time.
10 Custom Sound Presets
Store up to 10 custom sound presets with volume levels on each. Two quick access preset buttons are located on the side of the TX-500.
Design up to 10 entire stands including the individual sounds, volume levels, durations and passages of silence. When selected, a custom sequence will go through the steps you defined and complete your entire calling sequence without requiring any need for using the remote.
Control the volume level of the L/R channels on a stereo audio file. If you are playing a sound that has a rabbit on the left audio channel and a coyote on the right you can use FoxFade to gain independent control of volume of both sounds within the stereo file. (Decrease the volume on one or silence it completely while the other remains at the same level). In mono operation, FoxFade will act as a mixer moving sounds from the front speaker to the back speaker.
A/V (Auto Volume)
Auto Volume lets you to begin your sound playback at zero volume and slowly bring it up to your desired level. Once your desired level has been achieved, the volume level will begin to modulate up and down. This leaves your hands free from making manual volume changes and free for that great shot.
Three Sound Playback Modes
Continuous Mode results in the selected sound playing continuously until you stop it. Single Play Mode allows you to have the selected sound play one time then stop. Sequential Mode will play one sound to the end then move onto the next sound.
Adjustable Volume Ramping
Set the increment speed for sound increase and decrease. You can assign each volume up/down button press the be equal to 2,4,5,8 or 10 steps.
Adjustable Auxiliary Device Jack Control
Control how the auxiliary device jack operates from momentary (for use with FoxPro Jack in the Box Decoy) or latched for use with other devices such as different manufacturers decoys.
Wireless Sound Transfer
After programming sounds, you will not need to use a patch cable to transfer the list to the remote. The sound list will be automatically transferred into the TX-500 remote.
External Speaker Control and Mono/Stereo Operation
Turn the speaker on and off via the Tx-500 remote as well as mono/stereo operation.